Question about Power Tools Sanders Orbital Sanders
Orbital sander flicking the sand paper off I have a Bosch Pex400 AE orbital sander constantly flicking the sand paper off. I am sanding the paint off a barge board on the house using a course sand ...
CLEANING SANDER BUSHINGS IHAVE A BOSCH SANDER. IT ISN'T RUNNING AS WELL AS IT USED TO AND SOMEONE SUGGESTED CLEANING THE BUSHINGS. I'VE TAKEN APART THE SANDER AND FOUND THEM. THEY DON'T LOOK DIRTY. ...
Question about Power Tools Sanders Orbital Sanders
replace velcro pad on rupes random orbital sander need to know how to replace velcro pad please I have replaced velcro on various sanders , you just take the original velcro off and make sure that the
Sander stops when i put my sander on the metal it looses power and almost to a stop, and i have to bring it off the metal so i get more speed. There can be a few problems. First is your air supply the
belt sander 3x24 Porter Cable the front roller gets gummed up with dust and very hard to clean. I use a dremmel to clean it but the aluminum on the front roller is being damaged. any tip on how to ...
I have replaced the brushes, switch and tested the cord yet the sander will not operate, Any suggestions. check the comutator (where the brushes contact on the shaft) and make sure it is clean and not
sander stalling C.P. d/a air sander in rotary mode will stall with only the weight of the sander applied. Running 90 psi and 6.0 cfm through a 3/8 line. No quick connect at tool. I realize the line ...
Question about Power Tools Sanders Orbital Sanders
My Skil sander paper just won't stick anymore and I'm about to... The Velcro won't hold the sandpaper anymore help before I throw this **** off the roof Clean the Pad.
Question about QS800 2.0 Amp 1/4 Sheet Finishing Sander with Convexgrip
should I do some sort of cleaning maintenance? I've been doing a lot of sanding lately. Either vacuum or blow up the sander with compressed air
Where to apply grease I have got a noisy DeWalt D26441 palm sander, I want to grease inside as i'm replacing the broken base plate so will take it apart and give it a good clean, what sort of ...
Usually answered in minutes!
191 Questions
163 Questions
151 Questions
96 Questions