Questions & Answers for: Kenmore cleaning pump

Question about 3.8 cu. ft. HE3t Front Load Washer

1 Answer

flashing f 2 How do I get to the door to check out what's going on? The F2 code indicates the drain pump has either failed or become clogged. To check the pump, remove the bottom access panel. There ...

Ad

Question about 3.8 cu. ft. HE3t Front Load Washer

1 Answer

LD on Calypso ld is long drain lean washer back remove bottom panel if pump has screws in bottom remove them and clean pump if pump clean and just not running in drain suspect pump motor or relay bd ...

Ad

The drian pump is plugged with lint ,etc. how do I remove and cle A stffed pillow split open and clogged the washer . I 2nd rinsed drained most of the water out and got the door to open and cleaned ...

Question about Oasis HE 27082 Top Load Washer

1 Answer

washes fine but will not drain or spin out at the very last. this is a oasis HE and we use he soap. your washer will not spin or drain if pump is resricted you can clean pump. now if you clean pump ...

Question about Elite 45986 Front Load Washer

1 Answer

What does F2 code mean with the Kenmore Elite HE3? Based upon your description, the drain pump has either failed or the pump filter has become clogged. To check the pump, remove the bottom access ...

Question about Elite 45986 Front Load Washer

1 Answer

f 02 was flashing and the water is still in the machine how do i get the water out Based upon your description, the drain pump has either failed or the pump filter has become clogged. To check the ...

Question about Elite 45986 Front Load Washer

1 Answer

Kenmore Elite, HE3t, front loading washer, Model 110.45972404. Constantly shuts down during cycle with SUD or F02 signals. If I pause and restart sometimes it works. However last night it would not ...

Question about Elite 45986 Front Load Washer

1 Answer

...cleaning the drain hose and the drain pump filter, you can take out three torx screws from the bottom front panel and then clean the area completely, lift up the cap to clean the filter. If the error ...

Cleaned out trap was not draining. Washed ruggs that I should not have. Clogged system. Now when it runs it trips the power? It clogged the drain pump too. The pump is turning slower. The motor ...

Question about Elite 45986 Front Load Washer

1 Answer

sd code, not finishing cycle, water coming out door have cleaned trap and removed pump and cleaned Dont know if pump needs replaced? SD is a suds code. Could be build up in pressure hose for pressure ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machine Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...