Questions & Answers for: Husqvarna cleaning pump

Question about "Chain Saw - 16" Bar, 3 Hp

2 Answers

my 455 rancher chain saw is not using her chain oil the bar is clean, the hose from the pump to the bar is clear, but don't know how to take off the oil pump to see if there is any dirt there Replace ...

Ad

Question about Chain Saw 20" Bar

3 Answers

...cleaning and replacing any defective parts as you go. Carefully check the hoses for cracks especially at bends and connections. If equipped with an oil pump it is usually behind the clutch (clutch is ...

Ad

Question about , No.455 Rancher, 20" Gas - Powered Chainsaw

2 Answers

...cleaning and replacing any defective parts as you go. Carefully check the hoses for cracks especially at bends and connections. If equipped with an oil pump it is usually behind the clutch (clutch is ...

Question about "Chain Saw - 16" Bar, 3 Hp

1 Answer

no oil flows to chain... No oil flows to chain Depending on your knowledge and experience - 1. Find your manual and check on maintenance routines. 2. If no manual avail - clean your saw and your bar. ...

Question about "Chain Saw - 16" Bar, 3 Hp

1 Answer

My saw barely uses half of the oil tank with a tank of gas when new it used almost all of it and even sometimes ran out 1. clean bar & saw - checking oil holes, groove on bar; oil outlet on saw - ...

Question about "Chain Saw - 16" Bar, 3 Hp

1 Answer

the automatic chain oiler doesn,t work. i installed a new oil pump unit on the saw and it still doesn,t work. i cleaned everything up good. any else i can do. [email protected] ...

Question about , No.455 Rancher, 20" Gas - Powered Chainsaw

1 Answer

Chain is not getting oil. 3 hours on new 455 Rancher chain saw. I have clean everything on the bar and the oil outlet. Do I need to have a new oil pump installed? I saw many issues with the oiler on ...

Question about , No.455 Rancher, 20" Gas - Powered Chainsaw

1 Answer

Cannot find adjustment oil screw on my Husqvarna 61 Chainsaw Oil screw on Husqvarna 61 Chainsaw The 61 has a 4 position oil pump, the adjuster is a black plastic screw located to the top right hand ...

Question about , No.455 Rancher, 20" Gas - Powered Chainsaw

1 Answer

stalls slowing down Bogging down after little use Air filter plugged - Clean air filter Tank vent faulty - Clean or replace tank vent if necessary Leak in fuel line between tank and fuel pump - Seal ...

Question about Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348

2 Answers

...cleaning carb If this is a briggs and stratton they have a fuel pump on the front of the carb and ethanol plays havoc with the diaphrams in the fuel pump. I have to overhaul the fuel pump each year. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...