Questions & Answers for: cleaning iac

Question about 1997 RL

2 Answers

...iac-cleaning-85010/ Found a gr8 rescouce of info on this website: http://www.acura-legend.com/vbulletin/f13/diy-iac-cleaning-85010/ Step by step instructions on how to clean the IAC. Not a bad site ...

Ad

...cleaning the IAC and checking the wire harness for any damages and there is still no difference. Your going to replace the IAC. IDLE AIR CONTROL (IAC) VALVE REMOVAL If required, remove the attachment ...

Ad

Question about 2003 Silverado 1500

1 Answer

the IAC at the throttle body and try cleaning it by cleaning the whole throttle body, pay attention to the IAC passageways to clean it. If this does not help you may have to replace the IAC. Good luck

When Idling everything seems fine, but when I put it in gear, it acks like it isn't getting any gas. What do you think the problem could be? Dirty or faulty IAC ( idle air control) valve. The IAC is ...

Question about 2000 DeVille

1 Answer

...cleaning it turn the ignition on with the engine off. The Iac should move in and out to find the stops. If it does not move you have either bad wiring, Iac or pcm. Most likely is Iac. -------- For ...

Question about 2000 Grand Cherokee

1 Answer

how i clean Idle Air Control (IAC) Valve well, first of all remove from vehicle. most iac have 2 torx screws to remove it. use an old toothbrush or similar to clean it. do not put body of iac in any ...

Question about 2000 Grand Cherokee

3 Answers

...IAC and cleaning it real well along with the throttle body and plate. There is no way to know what is failing with out doing the test. Anything else would be a guess, the codes 1504 and 1507 are set ...

Question about 2004 Colorado

1 Answer

low idle running at 600rpm remove and clean the Idle air control (IAC) it may have carbon build up in it. make sure pcv valve is working properly. you can use carb cleaner to clean IAC valve. after ...

How do I adjust the idle on a 93 mercury topaz? I would clean the throttle body first and the idle air control motor(IAC). Clean where the plate sits and on the back of it/them. You have to remove the

Question about 1993 Topaz

2 Answers

Why my iac valve does not work What is year--make--model? Any applicable trouble codes? So your having trouble with idle? Remove throttle body, clean throttle bore and any small passages. Check and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...