Question about PIXMA MP610 InkJet Printer
...areas that should be black on a photo coming out dark red. All the cartridges are working properly as I have printed a test page and recently removed the head for cleaning. The priter is a Canon ...
...sure the print head is clean and open for printing. That is why you'll find the print head assembly parked on top of it. It also has a an electrical pump to milk the print heads and test for ink
Question about PIXMA MP610 InkJet Printer
print head out and wiped it with a moist towel then dried it, but to no avail. It still has the error message. HELP Make sure the contacts on the carriage assy. where the printhead sits are clean also
...Remove all ink cartridges, lift the gray-colored arm up, and pull the print head out. Clean the print head with a cotton ball soaked with water or rubbing alcohol. Dry and re-install the print
...print heads but with out successs Can you Help Try taking the cartridges out one by one & clean the contacts on each one with a little warm water on a small piece of cotton,check that none are ...
...printer. Follow instructions to do the head cleaning. If that is not enough you can remove your printer print head and try to clean it with dry cloth or with some kind of alcohol. good luck ...
...print head is clean and open for printing,That is why you 'll find the print head assembly parked on top of it. It also has a an electrical pump to milk the print heads and test for ink flow, Moving ...
...print head is clean and open for printing.That is why you 'll find the print head assembly parked on top of it. It also has a an electrical pump to milk the print heads and test for ink flow I ...
...print in colour although ink volume shows full? Sounds as if the printhead of your printer is blocked on one or more colours. I would recommend running 1-3 head cleans from your printer software and ...
Question about PIXMA MP610 InkJet Printer
...print head alignment and cleaned the heads. Normally the photos are great. I've also done a system restore after I was getting ''service error 5100'' and found no blockages. Try leaving on same ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions