Questions & Answers for: clean plates

plates. thx's jeff Clean the contacts that touch the plates with Qtips and 70% or higher isopropyl alcohol and replace the plates. Sparking on the plates usually is a sign of a crack in the plate. The

...dry before putting them back into the unit. If the plates are seated right and clean you should see a faint purple glow on the plates when the unit is on purify. Let me know if that's the case. ...

...unit? How do I clean the plate unit? clean with 50/50 ammonia/water, scrub with toothbtush, clean contacts with q-tip clean the plates with ammonia,something that leaves no

should look something like a simple piece of glass maybe an inch wide. Use rubbing alcohol or glass cleaner to clean the glass plate-DO NOT spray on the plate, spray LIGHTLY on the cloth or tissue-use

clean the unit and plates. When I put it back together, I still had the problem. I noticed no matter how I placed the glass plate in the slot, it arched on the same section of the plate. Since I had a

Unit powers up the two small lights won't come-on. Also air coming out stinks with A clean filter ? What you refer to as a "filter" is actually the "plate," I assume. (4" square white object with mesh

cleaning throttle plate and MAF sonsor TO clean the throtle plate use a small tooth brush and some throtle body cleaner. remove the intake hose, spray the throtlebody and then open the throtle plate ...

...the document feeder, not the plate glass. on my HP officejet J5780 3 in one. Your advice is to clean the small glass plate. I look everywhere to find this small glass plate. Can't see one. ...

how to clean throttle body on 07 envoy? To clean the throttle body you will need a tooth brush and some throttle body cleaner spray.Remove intake hose on throttle body, you may have to also remove the

...plates clean with a damp cloth and let them air dry completely before using the mini stove again. Note: Avoid using abrasive cleaners or scrubbers as they may scratch the surface of the plates. Also, ...