Questions & Answers for: clean holmes humidifier

Holmes, one of the causes of the Reset light staying on is scale buildup on the heating element. Remove Scale: Allow to cool before maintenance. 1. Repeat steps 1-5 in the Daily Maintenance section. 2

...holmes product hls5000 humidifier I turned on my humidifier and the reset light is on. I can't find a reset button. I tried re-seating the water unit, and turning the humidifier off and on, but ...

...clean the blades I have a Holmes table top humidifier. The fan blades collect dust and I can't find a way to remove the plastic grill above the blades so I can wipe them clean. No screws-no nothing. ...

how do i clean the fan blades on the holmes humidifier I am assuming a lime buildup from evaporated water. Use vinegar or drip coffee maker cleaner.

...the setting on 3. Also, water spill all around the humidifier making the floor wet. MAke sure you clean your sensor, it appears that it\s cover with scale, hard water, use vinegar safer than ...

Holmes HM5700 Won't reset. Screen comes up with reset and starts counting down form 450 Mine did this also so I unplugged it and took it apart and cleaned it. I used a sponge to clean all around the ...

...humidifier runs for a few minutes it just shuts off. You might need to clean around the heating element... we have very hard water and calcium builds up on and around the heating element and all the ...

humidifier wont stop leaking water at bottom Hard water will build up on the rubber plunger casket and the beveled edge were the plunger seats in the cap, if you clean both pieces it will seat it self

holmes 1700 blows air but no water or mist? If the water has been sitting in the reservoir for days without use, it may develop a film on the ultrasonic element which inhibits the creation of the mist