Questions & Answers for: Crossfire chrysler radio code

Ad

Chrysler crossfire limited from NY toIsrael. Unfortunately the radio tuner can only get American frequencies(unequal numbers) and the Israeli radio stations use the European (equalnumbers) frequencies

Ad

Question about 2004 Crossfire

1 Answer

RADIO WILL NOT POWER UP Check the fuse for the radio. Check your owners manual for the location of the fuse box and what fuse powers it.

Ad

Question about 2004 Crossfire

1 Answer

...Chrysler Crossfire died due to my not driving it for several months. I jumped the battery and drove it long enough to recharge, but now the speakers don't work. The radio is on as indicated by the ...

Question about 2004 Crossfire

1 Answer

CHRYSLER CROSSFIRE RADIO DRAINS BATTERY CAR WOULD NOT START, HAD NO JUICE. REPLACED BATTERY AND WAS FINE FOR TWO DAYS, DEAD AGAIN. HAD IT TROUBLE SHOT AT SHOP, AND FOUND THE FACTORY STEREO IS DRAINING

Question about 2004 Crossfire

1 Answer

trouble code po400 and po410 Have a 2004 Chrysler Crossfire codes 412 403 135 155 154 134 want pass inspection cel stays on replaced secondary air pump same problem help !!

...radio for Chrysler crossfire code to unlock radio When you disconnect your battery and then reconnect it again, it disables the radio. This is an anti-theft protection for your car radio. The enable ...

radio wont turn on or off, has no sound and cd is stuck in player Moves but has no sound. . Have checked fuses Radio went bad, replace it with a Good Quality Aftermarket Radio

Question about 2007 Crossfire Roadster

1 Answer

no volume on radio The radio lights up and shows everything like it is working but no sound. bad internal amp. needs to be checked out by a professional

Question about 2007 Crossfire Roadster

1 Answer

...code 400 for chrysler crossfire car would not start...battery seemed dead. got new battery installed it tried to start then nothing...nothing when the key is turned...getting error code 400 next to ...

Question about 2005 Crossfire

1 Answer

how to set clock on the radio Put it into "set up" mode then adjust clock settings.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...