Question about 1993 New Yorker
chrysler nw yorker 3.8 v6 runs good then just dies wont start and stay runing until 5 to 20 min. pass.check engine light not on all time but its worse when it is. If you turn the ignition on and off 3
...lights come off and on...They don't stay on long, but come on out of the blue while driving. Only on the inerstate at normal driving speeds. one of the ignition wires are losing power. this was a ...
Chrysler Concorde just stopped running while driving down the road. No warnings, the engine just shut down. The check engine light did not come on, the lights stayed on. When I tried to restart it, it
...with key removed. Running lights also stay illuminated. 2006 Chrysler Town and Country. think the ignition lock contacts have collapsed ,need a new ignition switch on the back end of the steering ...
Question about 1997 Sebring
...Chrysler Sebring Convertible has an electrical issue. She says that the lights stay on when the door is closed and they also flicker when she drives. She also says there are related electrical issues ...
...hasnt work since this issue started either. Interior lights stay on when the ignition is off and door is open. Then when the car is on and door is ajar, all the lights flash. Check ur
...lights stay on runs the battery down. Could be the ignition lock or switch, but it could be the shifter too. If the shifter is not completely in park, the key will not go to the lock
Question about 2004 Pacifica
Chrysler Pacifica cruise stopped working, navigation doesn't work, dash lights stay on after ignition is turned off, key fob doesn't work, driver side head light low beam doesn't work, I need to We've
Question about 2005 Pacifica
...Chrysler Pacifica won't start or turn over service immobilizer is displayed as well as check engine light flashes and stays on but won't throw a obd code no codes found air bag light is on key still ...
Question about 2007 Aspen
...will not cot off. Light switch is off, car is off & keys are out of ignition. Sounds to me you have a short to ground meaning its bypassing the switch that turns on and off the lights and staying ...
Usually answered in minutes!
Step 2: Please assign your manual to a product: