Questions & Answers for: Juki chop sticks

Loose stitching underneath. HOW CAN I FIX!!!! When using machine, there seems to be loose stitching with BIG looping underneith. Have tried thread tension and tighting and loosening. Does alright with

the hand wheel on my juki industrial sewing machine sticks and wont move how can i stop the hand wheel sticking Call your repair guy or take it in for cleaning and servicing. 

how can i stp my juki 8700 had wheel from sticking the hand wheel sticks and wont move LOLYou can take it in for cleaning and oiling.  The hand wheel sticking is a symptom of it needing service.&

Juki straight stitch upper needle broken off and stuck. I have a Juki straight stitch and in a rush to remove a broken needle, I accidentely broke the needle off in the machine. The top piece is still

Cannon insert needle-assembly seems jammed My needle fell out so I am trying to replace it.nit simply will not go up into the needle hole. I am sure the foot is down and the assembly is turned to the ...

...could try trimming your seams so the layers fabric graduate to full thickness. Or you could use a chop stick or popcicle stick to press down on the thickness as you guide the machine over the seam. ...

The needle broke off in the shaft and I can't get it out. How do I remove the needle or the needle shaft to get it out? unscrew the retention nut all the way. use the back of a screw driver and tap ...

Why does my bobbin thread keep sticking? My bobbin thread runs smoothly for a few stitches then it sticks and causes gathers in the fabric. I have bought new bobbins, rethread the bobbin and adjusted ...

There is power to my Juki Exceed sewing machine (checked the fuse, and also checked with a volt stick), but the machine will not turn on. No light and no start up noise.. do you have any suggestions? ...

need help with juki 982 bartack. Gets stuck in middle of bartack. Wd40'd pulllies and moving parts. I have to physically move part to get to finish. Does it again on next tack. What else can i do? Not