Questions & Answers for: chevy clutch noise

...chevy silverado has very bad noisse it seems it seems to be coming from front of air compressor You probably have bad bearings in the A/C clutch pulley. Remove the drive belt and spin the pulley for ...

Ad

chevy s10 2.8 v6. underneath my clutch pedal is a gear with teeth on it. when i press the clutch pedal it does seem to engage the clutch and i hear a ratcheting noise. any idea? Have you got a hole in

Ad

chevy trailblazer is making a loud noise from the fan could it be the fan clutch what kind of noise..clicking, tapping, grinding??? it's a very good possibility. the fan clutches in trailblazers are a

...Chevy Blazer S10.. Won't start.. It was trying to start but just wouldn't turn over.. And now today, the clutch is down to the floor and it won't even make any noise when I turn the key.. ...

...Chevy Trailblazer and the tachometer goes haywire as well while this is happening. What would cause this? A jet engine type of noise from the engine area usually means the fan clutch is going bad. I ...

...noise comin from rearend 1998 chevy Z71 sounds like poss clutches noise changes with speed changge not the ring and pinion i know that noise Clutches in a diff only work when you are going around ...

...chevy k1500 5 speed shifter will not engage transmission Will it go into gear if the engine is not running? If not then you have an internal problem. If is does, then you are looking at a clutch ...

Question about 1988 K1500

1 Answer

...chevy S-10 pickup. 2.2 4cyl. Manual trans. Clicking noise heard when coasing at slower speeds. (20mph or less). Noise only heard when clutch pedal is all the down to the floor. Noise happens if in ...

...chevy trailblazer engine revving noise Engine makes revving noise randomly the revving sound could be coming from the radiator fan clutch with the engine OFF try turning fan should have slight ...

...chevy s-10 i dont know if my master cellinder went out or the clutch.the last thing it was doing before it stoped movin completely .l had to barly touch the gas or it would start slipping (i just ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...