Question about 2000 Grand Cherokee
...4 liter 6. Once you get all the **** out of the way its like replacing a W/P on an "old school" engine, very much like a Ford or Chevy straight 6. 1) Remove radiator top retainer (the metal U that ...
...chevy suburban can be removed once you remove the radiator fan. Drain the coolant from the system. Here is a way to remove the fan clutch withouy a fan clutch tool. The trick is to leave the belt on ...
...chevy blazer. 1 Remove the fan and clutch assembly from the fan's pulley. The assembly attaches to the pulley with several bolts on the circumference of the pulley. To remove the bolts, position an ...
Chevy van (G20) that has a leak. In efforts to locate the leak in need to simply remove my fan shroud, but it looks as if I need to remove my grille to do that. Is there an easier way to remove my fan
Chevy Cavalier Ls 2.2, second day i drove it it started overheating,i replaced the thermostat, drained radiator and filled with antifreeze, tried to get ac recharged but had a busted pressure line had
...chevy 3/4 ton pu with a 350 motor. It reads 230-250 on the heat gauge. I had replaced both heat sencors on the side and the top of the block. Has a 180 theromstat fail safe. When it reads a high temp ...
chevy suburban. What else must be removed to get the fan out? some of those fans held on by a big nut that holds it to the water pump. the bolts should have just been holding the pulley in place There
...chevy suburban 350 engine Hello, there should 4 bolts and nuts hold this clutch fan on the water pump flange.. Check the clutch fan an see if the clutch is worn out. If the fan turn fast and if it ...
Question about 1989 C1500
...Chevy Cavalier to overheat? I just put in a new water pump and a new thermostat but it still tends to overheat and now has a leak from the thermostat intake hose. We need rule out a few basic things ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions