Questions & Answers for: cherokee in limp mode

Question about 1995 Grand Cherokee

1 Answer

...i got a leak in the trasnission fluid cooler line replaced line and now transmission is stuck in safe mode What exactly is it doing? 1995 Grand cherokee doesn't have a limp mode for the

Ad

Question about 2005 Grand Cherokee

1 Answer

...limp mode Riding my 2005 5.7 hemi GC Limited today. Hit a bump in the road and felt it shift into 3rd. Now it is in limp mode, 3rd gear only. I don't know if the bump caused it or if it was a ...

Ad

Question about 2000 Grand Cherokee

1 Answer

limp mode reset Limp mode will reset by itself once the problem that caused the system to trigger the mode is repaired. You must have the Powertrain control module scanned there will be fault ...

Question about 2000 Grand Cherokee

1 Answer

limp mode changed transmission throttle body and it went into limp mode when vehicle is shut off then restarted it will come out of limp mode. if problem is still there it will go back into limp mode.

Question about 2007 Grand Cherokee

2 Answers

Cherokee has gone into limp home mode twice in the last week. Each time no dash warnings come up, but after sitting idle at a stoplight it suddenly won't go above about 2,300 RPM. I took it to the

Question about 2007 Grand Cherokee

1 Answer

Cherokee overland, earlier i was traveling at 60mph then tried to accelerate and the engine management light came on and the electronic throttle light flashed red. the car lost power and would not rev

...Cherokee 5.7 Hemi, 545RFE transmission is sometimes going into limp mode, usually after appearing to go into neutral instead of changing into second when accelerating. TCM Codes stored are P0732, ...

...Cherokee Limited 4.7 4wd in limp mode with code P1781. I've already changed the pressure sensor and solenoid block and it's still in limp mode. I've cleared the code and performed the relearn ...

...Cherokee Limited 5.7 In limp mode when shift into drive goes into 4th gearTransmission shift solenoid did not fix issue Replaced Transmission shift solenoid did not fix issue have vehicle scanned for ...

...What you need to do is connect a good quality DTC code reader scan tool and see the real reason that Limp Mode has been engaged. https://www.google.com/search?q=1999+jeep+cherokee+limp+mode+causes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...