Questions & Answers for: check upper bobbin thread brother

...check if upper or lower thread is broke" even though it wasn't and we took the bobbin section apart and now it will not thread the bobbin through im going to help you as much as i can,,,,try using a ...

...bobbin thread completely covers the upper thread on the top of the embroidery. I tried adjusting the upper thread tension, but it doesn't seem to make any difference whether the tension is on 0 or 9. ...

check upper tension and needle is properly seated. The needle drags the thread down and then starts back up causing a loop at the eye which a shuttle goes through and acrries the upper thread over the

...case area is free of lint or loose thread make sure you hold the upper thread tail while it's going down to pick up the bobbin thread make sure there is a 2 to 4 in tail for the upper thread to ...

upper or bobbin threads aren't threading properly, sometimes adjusting the tension will correct this problem. Timing Your sewing machine works by passing the upper thread through the needle of the

...upper thread.  Bobbin snarls are caused by the bobbin unspooling in the wrong direction.  Burrs and snags on the carrier. Upper thread snarls in the bobbin area are "operator error"  ...

...brother pr655 and the needle threader is not working properly. It keeps getting the thread tangled. Use this link to download the manual go to troubleshooting section in the back for help .User Guide ...

...with upper thread to form a stitch - with the result being only upper thread that tangles under the work. Please help! Hai, Please check the bobbin tension and winding. And cleaning the

...bobbin case and all covers, checked for proper needle and threading for upper and lower threads. The two threads won't join (the upper thread will not pick up lower, upper gets caught and crosses). ...

Upper thread could be tangled or threaded incorrectly - Check that the thread take-up lever is threaded - Raise the presser foot to raise the needle to its highest position and re-thread the machine 2