Questions & Answers for: check spray head coffee maker

...spray heads after it has been on for about 15 minutes. Any thought would be appreciated. Thanks in advance! Thermostat is either bad or your heating element is bad. Check both and also check for ...

...spray tube does not necessarily clean the whole water brew system, and you could still have a flow problem to the sprayhead. You can check it, just pour in water, no coffee or filter, the funnel in ...

...check is the spray head, unscrew this you may need some channel locks to get it off and check it..use a tooth pick to clear the 6 holes with any lime that may have formed...also if you use a ...

...is the spay head is blocked and the water is coming out the over flow if there is one, which is then bypassing the filter. Things to check would be heat, spray head and filter. Hope this ...

...thru quality control. No wonder it was making weak coffee, and I was wasting coffee to try get it stronger. Is your making weak coffee? CHECK YOUR SPRAY HEAD. Make sure the coffee maker has one on

...the spray head. Stops leaking after the unit is off after a while but starts again when switching the unit on and continues leaking after switching off again for a time. Check the water level

...vinegar check spray head as they get deposit build-up in holes (they unscrew) and while head is off run some water thru machine. never use vinegar or any chemical cleaner inside bunn coffee ...

...spray head. Also it does not use all the water so the pot of coffee is short. I have removed the top and the washer I can see under the plunger appears to be in good shape. I use filtered reverse ...

...check is the spray head which pours the water onto the powder. remove the spray head, clean it and soak it in descaler. reassemble and do a brew. When finished check the surface of the coffee has 6 ...

...spray head off of my Bunn Coffee maker. It seems to be stuck. Bunn spray heads are about the size of a 50 cent piece. They should unscrew counter-clockwise. Only these round ones unscrew. Call your ...