Questions & Answers for: Chevrolet Corvette how to check mofa number

Question about 1998 Corvette

2 Answers

...Check under the dash or on the sides of the dash with doors open, or under the hood in a box marked fuse relay. In most GM cars and trucks these are the places where thay stash the fuses The fuse for ...

Ad

...check the number on the relay (marking it with a spot of paint) so you dont get it mixed up with another one Then check it with another one in the relay box and if the number is the same then put it ...

Ad

Question about 1990 Corvette

1 Answer

...check the other characteristics of the block to determine in which decade and year it was made. Some parts have the decade and year cast on them; these identifiers look like this: ?C 18 84.? GM ...

check your timing as previously suggested. Place your number one cylinder in TDC by aligning the mark in the pulley with the mark in the block. Check your (distributor) rotor position and make sure is

NUMBER W/o head up display, I suggest check here... Remember, before proceeding with check out, please confirm part number with our customer service at [email protected] Hope this help

...check engine light come on? any fault code there, I suggtes scanned the PCM to obtain the OBD codes, with thisa code number copuld send other details. any number of things go to any auto parts store ...

Question about 1984 Corvette

1 Answer

...brighter at night but still cannot make out numbers the gauge cluster lights are not functioning, check them by pulling out the guage cluster and replacing burnt ...

Question about 1989 Corvette

3 Answers

...number to any GM parts dept. They will be able to cross the VIN# to the key code for your car and make keys to fit. check with a chevy dealer parts desk check on eBay check with a google ...

...what ###? YOU WILOL NEED TO LOOK FOR A CIRCUIT BREAKER NOT A FUSE CHECK UNDER THE HOOD ALSO, LOOK UNDER THE COVER OF THE FUSE BOX IT SHOULD GIVE YOU THE NUMBER AND DESCRIPTION OF WINDOW MOTOR

Question about 1986 Corvette

1 Answer

check is valve timing. first locate the number 1 spark plug wire terminal on the distributor, mark its position on the base of the distributor or the intake manifold, remove the cap and turn the crank

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...