Questions & Answers for: Dodge Caravan check engine light codes

Check engine soon light The Check engine soon light came on last night. the code is a "manufacturers code" # 14191. What does this code mean ? Check Engine Soon Light Came on and stayed on. Please ...

...check engine what does it indicate ? To check the code for the engine light without OBD tools for dodge caravan is to switch on the key 3 times without starting the car and you will see the code ...

check engine light is on. My check engine light is on in my 99 dodge caravan, because the radiator fans were not working and the 3rd cylinder was misfiring. I got the misfiring problem repaired but ...

Check Engine Light won't go off My 2003 Dodge Caravan has the check engine light on all the time. I took it to a mechanic and he checked major stuff and suggested replacing the gas cap. The diagnostic

Check Engine light. Misfire Cylinder 4. Keeps coming back Had a Check Engine light. Misfire Cylinder 4. Code was P0304. I changed the plugs, wire, coil pack. Everything was fine check engine light ...

Check Engine Light and Reset the Computer. When you have a check engine light and you get the codes scanned, are they erased and cleared using the same tool or do you need to make the repairs and then

...engine or "check engine" light, comes on when one of several systems that control emissions or engine operation fail a start up test or when system component fails during operation. The On Board ...

...Check Engine Light. Many Repairs,Cant Clear the code Hello everyone. My names John. I have a 2001 Dodge Caravan 2.4 Liter 4 Cylinder Minivan. I got a check engine light back in September, and I got ...

check engine light is on Check engine light is on The check engine light comes ON,when there is error code stored in the car computer. to get car scanned at diagnosis center to get error codes, At ...

...check engine light caravan has check engine light on looking for steps by ignition to reset ? run fault codes to find out the reason the engine light came on. If you have fixed it then use the fault ...