Questions & Answers for: check engine dash light

check engine light. trac light on. when i step on breaks reverse square indicator on dash board goes on. No reverse lights and rear light indicator on. wires are pinched and shorting together near the

...engine started. wanted to check charging rate so attempted to turn dash lights on. switch pushed into dash and engine died. moving now loose switch causes various actions. In one position engine ...

...check engine, seat belt, etc. but you can't see the dash at night with the lights on. Any assistance would be great. Thanks in advance. the dash lights are usually on the tailight fuse so check

...check engine dash light in 2004 deville. dealer has told me what is going on and i choose not to repair at this time. how do i make the check engine light in dash If the check engine light is on, one ...

...check engine soon; abs brake light; check engine coolant. Is the engine checked? Coolant and abs? hello! take you're vehicle to the nearest AUTO ZONE auto parts they will reset codes off dash,, ...

Check Engine light is ON? http://whatisbyme.blogspot.in/2012/05/car-runs-fine-but-check-engine-light-is.html ---------- Check engine light with codes P2195 and P2197? http://howtobyme.blogspot.in/2012

Check engine light comes on and off, these are indication that there is some error code stored in your vehicles ECM. The engine module computer needs to be scanned. These will give the code and as per

check engine light on with the TPS code. replaced TPS and pig tail and it checked out OK with volt meter. The light still comes back on with the TPS code What else could be wrong that would make the ...

...check engine light on and also dash light for gas cap is on troubleshoot the check engine light and gas cap light on the dash take the cap off and shake it.. if it rattles replace it..there is an ...

...Check engine light stopped working. So I took cluster out of dash ,replaced with new bulb (verified working bulb) no check engine light still. Possible bad contacts in bulb holder or ripped copper ...