...Broken fuser heater lamp wire. Check for continuity. If none, replace the fuser heater lamp (See page P.1-5-15). You need to replace the fuser. 6000 means fuser error 0098269 is your page ...
...6000 Contents: Broken fuser heater lamp wire 30 ppm model: The temperature does not rise 1×C after the fuser heater lamp has been turned on continuously 5 s. 35/45 ppm models: The temperature ...
...6000 error is a fuser error. Check connections; make sure the back door/cover where the fuser is located is closed. Turn the machine off, unplug, plug back in, and turn printer back in; if you are ...
...6000 error is a fuser error. Check connections; make sure the back door/cover where the fuser is located is closed. Turn the machine off, unplug, plug back in, and turn printer back in; if you are ...
...6000 errors. CHECK IF THERE IS ANY PAPER IN THE CONNECTOR SOCKET ON THE FUSER AS WELL AS THE PRINTER CONNECTOR. THEN REPLACE FUSER FK-310.CHEERSKYOMAN Broken fuser heater wire, Deformed connector pin ...
...6000 error code. I read the description of the problem, it sounds as is decribed, that the issue is with the Fuser itself. I replaced the fuser, still the error code remains. I also checked the ...
Question about Mita Fs-1016 Mfp Multifunction; Printer / Copier / Scanner. Meter 35,970
...Check procedures/corrective measures 6000 Fuser unit error Yes Yes Yes No No Turn power switch off, and remove power cable. Detach connector CN4 on power supply unit. Detach connector CN1 on power ...
...6000 Check the lamp and the thermostat for continuity. Check the operation of the thermistor. If something defective replace. Most common is the thermostat. In addition, check the operation of the ...
Question about Mita Utax Cd-1316 Compatible Copier Toner 6000Pgs Black Replaces Tk112 Kyocera
...error code used with bigger copiers Error 6000 is fuser related. Broken fuser lamp error =bad thermistor =broken thermal cutout =bad fuser lamp check these items, if possible replace fuser
Question about Mita Utax Cd-1316 Compatible Copier Toner 6000Pgs Black Replaces Tk112 Kyocera
...6000 . i chiched the motors of the machine from service mode it does not run . also ichiched the fuser lamp it was brocken so i replaced it. any help? Hi, C6000 : Fuser heater break. Fuser thermistor ...
Usually answered in minutes!
223 Questions
192 Questions
168 Questions
156 Questions
143 Questions