Questions & Answers for: charge package unit

...package, how to start TOMTOM ONE XL to locate my position etc. The unit was fully charged from the factory. Turned on thwe unit and followed simple directions to position my location. Rest

add freon to package unit is ther special tool for charging a package unit the ports dont have a shradder valve in them There are shut off valves under the brass caps by the ports uses hex wrench.

charge it? plug your unit to your computer using a USB cable (included in the package bought) and be sure to separate the unit from the cradle before trying to charging it. For me, if I leave the unit

...charge. Within 30 mins it is red and no longer serviceable From the information you have provided, the battery in the unit needs to be replaced. From past experience, I can only suggest that you ...

...package unit model 64hwc303a-2b. The repair contract i have on this system (my gas and elec co.) can't find the nozzles to recharge the system with the coolant, and don't have a manual on this unit. ...

...unit will take a very slow charge via your computer. I tell most people no it doesnt charge VIA your PC just because it takes soooo long. I recommend getting a new power cable from GPSCity. Just call ...

...charge? When i remove the battery and plug it in, it still flashes the same readout. Is this unit faulty right out of the package? depending on the size of the battery, it can take upto 20 hrs to ...

...multi zone with 2 25' linesets. Will I need to add additional refrigerant to the unit to install? The package of multi condensor is pre charged. No need to charge again unless if there was

...I've had the unit in the package for a few months. Do I just need to charge the NiCd battery? Seems like it should still work when plugged into the wall. nicads need full charge monthly used or ...

package unit tubes freezing up after metering device check refrigerant charge. A low charge with cause what you are experiencing.