...channels. I'm not sure of that particular scanner, cause it's been about 10 years since I've seen one up close. One old scanner I had, I would have to punch in the channel # for it to lock out the ...
how do clear the scanner to re program it Programming a frequency into a channel clears the previous channel entry, so there's really no need to "clear" the scanner for reprogramming. To eliminate an ...
...scanner pro-82 now how do i program the channels back. the bank1 is blinking and is on channel 1. i do not have any scan codes for local fd/pd in the 78801 area zip code. For a comprehensive database ...
CHANNELS You can make your scanner scan more efficiently by locking out channels that you have not programmed. Manually select the channel and press [LOCK OUT] so that LOCK OUT apperas on the display.
...scanner. With 30 channels, I'm guessing that yours is actually a BC60XLT-1. To program a known frequency into it: - Power the scanner ON. - Press MANUAL. - Enter the channel number that you wish to ...
Question about Pro-96 Scanner
...scanner says all channels locked and it ... My pro 96 scanner says all channels locked and it wont scan. If there is no frequencies on your scanner it will lock all channels out. if all your ...
scanner does not scan its channels, press the letter that corresponds to the bank. The bank's letter disappears from the display. To unlock locked-out banks, simply press that bank's letter again. The
...channels, including the Priority channel. Lockout information is retained in the memory when the scanner is turned off.To Lock out a Channel Example: Suppose you want to lock out Channel 2 because it ...
Question about Bearcat BC 220XLT Radio Scanner
...scanner properly Push the "L/O" lockout button and it will lockout that channel. When you press "Scan" you have to have at least one of the banks scanning, so press 1, 2, 3,....9, 0 whatever bank you ...
Question about Bearcat Scanner Bc355c 800 Mhz Mobile Police Scanner 300 Channels
...squelch control gets rid of the hissing on a blank channel. Finda blank channel, turn up the squelch control until the hissing stops. The scanner should then scan the channels and stop on a busy
Usually answered in minutes!
980 Questions
644 Questions
497 Questions
317 Questions
274 Questions