Question about P4S8X-MX Motherboard
...Have the DVDROM set up by itsself as Master on the primary IDE channel, the CDROM as Master on the Secondary IDE channel, and the ZIP as Slave on the Secondary IDE channel. Hope this helps! ...
...the "primary" channel, not the "secondary" channel. Check the "slave" device, not the "master" device, on the "primary" channel. The device either has failed, or is announcing that it soon will
uverse says no channels in master list tv says no channels in master list Do resetting and go for auto scan. If the channels are not stored, there is something wrong with the memory chip ...
Question about M220NV 22 in. LCD TV
...master channel list on my Visio TV? I have added a Winegaurd HDTV antenna to my Visio LCD TV and completed the channel scan. I'm getting the channels, but have an error in the middle of the ...
Question about Speedlite 580EX II TTL Flash
...Master, say Group A & Channel 1 Two 270EX II must be set at Slave, say Group A & Channel 1 or One 270EX II set at Group A & Channel 1 Second 270EX II set Group A & Channel 2 Then go ...
Question about PowerEdge 1400 ( pe1400/210 ) Server
...Master can be single drive on one IDE channel. Or, one master and one slave on a single IDE channel. From there you have the option of expanding over to the secondary IDE channel. Hope this
Question about ClientPro 365 PC Desktop
...channel 0) master and the cdroms to master and slave on the secondary (channel 1) channel. the bios config jumper will allow you to config the bios, norm is for normal ops and there should indeed be ...
Question about TITAN 2 VHF/UHF Pre-Amplifier with Power Supply
Channel Master Titan 2 Model-7777 not working Purchased on 7-2-2014 it worked perfectly for 30 days on 31st day it quit. On 8-2-2014 I purchased a second unit and it is working perfectly like the ...
Question about TITAN 2 VHF/UHF Pre-Amplifier with Power Supply
...master and channel. Turn off any reverb or effects. Turn the master volume 1/2 way up. Plug a sound source into channel 1 wiyj the channel volume all the way off. Turn on the amp. Slowly raise the ...
Question about TITAN 2 VHF/UHF Pre-Amplifier with Power Supply
Channel Master 7000 PAL DVR program guide so the clock is accurate in PST Channel Master opened up one day and the program guide was on eastern standard time not pacific like it should. It is also off
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions