Questions & Answers for: changing stator

...changing the whole stator to fix it? you have some seals that are leaking from around the crankshaft the stator is supposed to be sealed from the oil you wont have to change the stator just the crank ...

Ad

Question about 2000 FLHR-FLHRI Road king

1 Answer

replaced voltage regulator,still not charging check output of stator unplug should get raw volts 40 volts or higher just check w/ vom. don;t run to long w/ stator unplugged .. smell primary funny ...

Ad

I changed my stator on 2002 yz 250 after it stop running ..so with new stator the bike lasted about 4 laps at track .i bought aftermarket stator .do you think i just got bad stator or is something ...

Question about 1992 VN 750 Vulcan

2 Answers

Stator change in replacing a bad stator do i need to unbolt the engine for clearance to remove the bolts in the stator cover? main engine heat sing up side have 4 bolt.open it clearance pocket inside.

Question about 2003 FXD Dyna Super Glide

0 Answer

change a stator on revtek 100 this is a custom harley with a Revteck 100" motor w/ an open primary and need to change the stator Hi Anonymous, for more information on your question please visit the ...

Question about 2003 FXD Dyna Super Glide

1 Answer

Changing stator on 2009 xl1200 In order to change the stator you need to drain the primary fluid , remove the cover. And remove the primary chain, clutch and compensator assembly. Then you need to ...

Question about 2003 FXD Dyna Super Glide

1 Answer

I own a pulsar 220. I am facing a problem with my stator. At times when the engine gets heated, the stator keep rotating but the engine dosent start. Just the stator, nothing else inside the engine ...

Question about 1988 VN 750 Vulcan

0 Answer

1988 Kawasaki 750 Vulcan change the stator I have a 1988 Kawasaki 750 Vulcan motorcycle and want to know if you have to pull the engine to change the stator? Hi, Dan this is your lucky day should take

1998 vl1500 aftermarket stator wiring it came with adapter but no diagram does it matter what order the 3 stator wires go i changed the stator and regulator (1998 vl1500)the kit came with a ...

...Changing the stator on a RevTech 100 engine with an open primary can be a complex task that requires mechanical expertise and specialized tools. If you're not experienced with working on motorcycles ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...