Questions & Answers for: Subaru Legacy changing the belt

do i need change my engine belt in my 2001 subaru b4? I assume you mean the camshaft timing belt? If it has never been replaced, the answer is "yes." Otherwise follow the service interval outlined in ...

Ad

Cam belt change - which mileages? 245k on clock, changed once at 197k 1.8 L no turbo station wagon (estate) subaru legacy 1991. Cam belt changed 197k, now at 245k. When does cam belt need re-replacing

Ad

Question about 1995 Legacy

2 Answers

change cam belt on 1995 legacy change cam belt on 1995 subaru legacy If your going to do or get this done you need to replace the camshaft seals crankshaft seal and water pump plus the idlers and ...

Question about 1994 Legacy Outdoor

1 Answer

cam belt change i have a 51 reg 1.2 ford fiesta v-tech engine that has done 60,000 miles, can you please give me an honest answer on when the cam belt should be changed. Thank you AT 100,000 KM

...recommend changing your Timing Belt at 75,000 miles. It is much better to be safe by changing it than having it break and add up a lot of extra expenses. Good luck and I hope this helps you, ...

i have a 2.5 DOHC i changed the timeing belt and head gaskets in but it will stop turning when turned by hand . all the timeing marks line up . help The timing marks are align in the correct position ...

Do Subaru Legacy 1991, have cam belts that need reg replacing Hi, I'm looking at buying a Subaru Legacy 1991, do they have a cam belt, and if so how often & how much should it cost to replace? yes

...changing the timing belt/timing? You don't have too, but not bad idea, the timing belt drives the water pump, if you just replace timing belt, and not water pump, water pump could go out and mess up ...

Question about 1993 Legacy

1 Answer

I have a 1992 Subaru Legacy Wagon.Told I need to replace the Serpentine Belt.If the belt should break before I have it changed,will the vehicle still operate? Depends on which belt - if it's the ...

Question about 1993 Legacy

1 Answer

set camshaft timing Engine was disturbed during timing belt change, how do we find proper timing? there should be marks on crank pully and cam belt pully. rotate motor until crank pully timing mark is

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...