Questions & Answers for: change serpentine belt power steering

...serpentine belt yesterday afternoon and today when we drove it, we lost the power steering about two miles from our house. When the engine is cool, the power steering works, but once it warms up the ...

Ad

...change the serpentine belt on a 1998 Buick LeSabre, 3.8 How does the pulley for the power steering come off?? My friend; Try this; Check the belt pulley may have attaching tension bolts (Nuts), etc. ...

Ad

...serpentine belt the serp belt is driven by the crankshaft pully and also has a tensioner may i suggest you check the crank pully it mayhave parted at the rubber damper and is spinning off line/back ...

Question about 1994 Cutlass Supreme

1 Answer

...change the serpentine belt. What do I do? 2.8L and 3.1L Air Pump Belt Disconnect the negative battery cable. Loosen the air pump. Remove the worn belt. To install: Adjust the belt to specifications ...

Question about 1997 Grand Prix

1 Answer

...Serpentine Belt is probably smoking too. Change the power steering pump (now) and inspect the Serpentine Belt real real good before you put it back on as it may very well need replaced now too. ...

Question about 2008 Pt Cruiser

1 Answer

...change a power steering belt on a 2008 PT Cruiser? My belt snapped in the parking lot and the steering is too stiff to drive the car any further. What tools would I need? Whats the best way to get at ...

Serpentine belt keeps popping/slipping off I put a new tension pulley on, changed the power steering pump, and put on a new serpentine belt, but the belt still pops off every time I start the car. I ...

Question about 2002 Altima

2 Answers

...Change The Serpentine Accessory Belt On Nissan Maxima Altima Etc Nissan Drive Belt Tensioner and Belt Replacement 3 5 Front Wheel Drive There are several videos on how to change out the serpentine ...

...change belt tensioner at same time? Usually a good idea. Check serpentine routing. Probably wrong path. Disconnect battery for 10 minutes to reset computer. May need to clear codes using OBD code ...

...serpentine belt the car run ok then the serpentine belt broke drove home ok removed broken belt bits and fitted new belt now starts then stops How long does it run? Sure you only changed the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...