front of TV including power button. On-screen TV channel number and "Stereo" will remain on...they normaly only remain on for two seconds after changing channels. To resolve issue I un-plug TV from AC
...change the TV to true game mode. I don't know what it acutally does, but it isn't really in game mode. What I did was bought a universal remote (a specific one that someone told me about) for 8 bucks ...
...mode" you can't change the channels until you turn game mode off. What I did was bought a universal remote (a specific one that someone told me about) for 8 bucks at walmart and I was then able to ...
...mode. It is also possible that the back plane supply and or lamps have failed. Jerry G. I would disconnect the inverter from the power supply and see if the voltage on your power supply comes up, or ...
...mode, perform the following: Turn GA_googleFillSlot("TL-IMU-Article"); on the TV. Simultaneously hold down the Vol+ and Vol- buttons on the front of the TV. Do not use the remote control. Hold for ...
...change the tv from game mode then m 6 year old brother messed with tv and now I can not get it back to game mode what do I do If you could change channels with a remote, you probably don't have, and ...
...back up the NVM content via ComPair, to prevent loss of the settings. After component change, re-load these values via ComPair. REMARKS: The SW cluster name of your model can be checked in SDAM
change from tv stations to Video 1 and Video 2 merely by pressing the "Input" button on the remote. Another reply mentioned using a duraband model instead of Emerson and it worked for him. There is no
Question about 55PL9773 55" Rear Projection Television
...front when i do a hard reset tv boots up lamps lites led goes from flashing yellow to green for about ten seconds and then back to red flashing light (protection mode) any ideas thanks MY philips tv ...
...Mode (the options are Antenna, Cable and Auto) and make sure that is set correctly. Next select Auto Program to look for all available channels or Edit Channels to change the channels you will see ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions