Questions & Answers for: Hyundai Sonata how do you change fuses

Brake lights keep going out I know that this is a stupid question, I fortgot to add this to my previous question, The brake lights keep going out when I put a new fuse in, as soon as I tap the breaks,

...change either! Does this sound like another fuse problem or is it much worse? Thank you kindly in advance :) it does sound like a fuse problem. make sure the fuse you replaced did not blow again. the ...

...fuses both under the dashboard and under the hood and they none of them are blown. My gut feeling is this is all related.. If someone has any ideas I would appreciate them you must run a scan and try ...

...Sonata aux outlet you likely have a blown fuse. look in your owner manual for the fuse location and change it with a new one of the same amperage. In the unlikely event that the fuse is not the ...

...a 2003 hyundai blower stop working dont know what fuse to check its santa fe LOCATE THE FUSE AND CHANGE IT OUT IT .S A FUSE RELAY there is a short to ground some where in the dash. you will have

...Change the fuse and it must correct the problem, that's what is for to prevent devices from damage. Electrical fuses protect vulnerable electrical circuits from shorts and burnt wirings, so ...

my wipers stopped and the fuse blows as try to change it for a new one Troubleshoot the wipers. First disconnect wipers from under the hood. Replace the fuse. If the fuse still burns out then the ...

Turn Signals dont work Sonata GLS 1997 v6 3.0L the bulbs are new but cant find the right fuse to change all fuse seems to be ok see the diagram attached. test the bulbs+fuse+loose wires+corroded wires

Low beam doesn't work 2011 Hyundai Sonata The driver side headlight does not work. The passenger side is fine, as are high beams and turn signals. I changed the bulb, and it still doesn't work. I ...

Changed my battery and now my radio, a/c and heat won't work. Instrument panel shows the battery light, ESC, and brake light??? Checked fuses and battery cables. Did you take off the cables prior ...