Questions & Answers for: Whirlpool change door lock code

...change a $300 CCU because of a $2 relay failure. For me this was worth the try as I have some experience working with circuit boards. The relays would be a quick repair for anyone with similar ...

...change a $300 CCU because of a $2 relay failure. For me this was worth the try as I have some experience working with circuit boards. The relays would be a quick repair for anyone with similar ...

Door Locked after FA code Duet GHW9300 front loader was turned on when the water supply was off. It flashed FA code. The cancel was pressed 2 times and unplugged but the door is still locked and it ...

...DOOR LOCK ERROR, A F CODE USUALLY HAS A # AFTER IT AND WOULD INDICATE AN ERROR. W/P HAD SOME MODELS THAT REQUIRED CHANGING THE DOOR LOCK-MECH AND CONTROL BOARD . HOPES THIS HELPS, PLEASE CONTACT ME @ ...

my front load locks and i get a error code fL 11 and dL u need to change the main board. DL is a door lock error code

door lock switch assembly as the lone culprit. Be sure to unplug the unit before attempting this repair and use caution. this is a long drain code. probably just something in pump. takeoff kick plate.

change any of the cycles. The only code that comes on is INT. The door button shows locked but the door doesn't lock. I can unplug the machine and plug it back up and machine will show 105 minutes for

my whirlpool front loader door won't open f3e2code Error code f3 e2 the door lock may need to be changed as door safety is not unlocking so door not opening

door lock is no longer on. I get a 3 flash - 2 flash code and beeps. unplugged over night but no change. stays locked. Solenoid has failed. You'll have to take the top off and reach down to unlock the

...Door lock light started blinking and I can't start the washer. I was in the process of changing the water temp and the door locked light came on and started flashing. Power and start button will not ...