...change it to TN (Tone dialing). Use the link (on this website) to the instruction manual. I glanced at instructions to change it to pulse when I was researching my problem. They probably have ...
...until you see dial mode. 3. Press the select button and use the up/down arrow keys to change it to pulse. 4. Press the select button. You will hear the phone beep which indicates it has been
Question about 5.8GHz Analog Cordless Phone
...change my phone from pulse to touch tone Here are the instructions for one vtech phone (may not be quite the same as yours but may work or give enough hints for you to figure it out): Press ...
change to pulse dialing I have a Vtech model CS6219-2 that has a menu option to turn tone off. I had done that but it will not dial out using pulse. I think this phone might not support pulse since on
Question about Two Line Digital Answering Machine Phone
on the base unit will read PU indicating pulse dialing. Now press and hold SELECT to change it to TN (Tone dialing). thank you, vijay dont beleive sol above ...i have tried it but its not working ....
...a dialing option. Choose T or Tone not P or Pulse dialing. Depending on your actual phone model there may even be a button on the handset to change this setting as well. Hope this helps and Good
Question about DECT 6.0 Digital Cordless Phone
...dial mode is preset to tone. If you do not have touch tone service, you need to change the setting to pulse. To change the setting: Press the MENU softkey when the handset is not in use. Press or to ...
Question about Cordless 6041 Phone
...CHANGE IT TO TOUCH TONE AND DON'T KNOW HOW Press MENU/SELECT to display menu when in idle mode.Press up/down to reach Setup BS. Press MENU/SELECT.Press up/down to reach DIAL TYPE. Press ...
change a vtech phone to tone Enter the model of your VTech phone into the search box at http://www.vtechphones.com/support/general/manuals to download a copy of the manual. The manual will explain how
Question about 5.8GHz Cordless Phone with Digital Answering System
change the dial modee• Press PROG. • Press o runtil the screen displays DIAL MODE: and the current settings• Press SELECT. The current setting blinks • Press or to select TONE or PULSE. • Press SELECT
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions
