Questions & Answers for: change the coil

...coil......just change position of the coil on the module to check this. After you get it running good......change the crank pickup....they should be changed on every tune up on the 3.8...... I have a ...

...change the coil too (all codes are for ignition coil circut malfunction) marko P0351 coil cylinder 1, p0352 coil cylinder 2, and so on. If you do any on bank 1(cockpit side) then change all 3 coils ...

...see if your coils are bad, simply change out your bad two coils with two coils on the other side of the engine that are good...if they misfire code changes, then you know its a coil...if not,

changed coil pack that wasnt firing started fine changed coil pack that wasnt firing started fine couple times now wont start just turns over check the fire to the coil pack if it's present then check

...coil no change changed spark plugs and wires, also changed coil car ran great for 35 miles then stopped , dying not starting. Put old coil back on because it was working fine, it started but missing ...

change coil#3 on the3.0 engine? coil 3 on early engines it is under the inlet manifold you have to remove it. you should also change all 3 plugs whilst manifold off the plugs can cause coil failure.we

...need to find out where #4 is No.4 is at the gearbox end ...run the engine ,pull the plug off the coil and if there is no change then that's the problem...when you change the coil also change the ...

...If it jumps to other cylinder where there you atached the coil from cylinder #3, change the coil. You can also check Coil On Plug Boot for damage and simple change the part. very easy and

...coil change plugs and move coil to another cylinder if the misfire changes to that cylinder change coil as well. I recommend changing all the coils at once though if over 60000 miles as the have a ...

99 F350 v10 Burning no 7 coil pack after 2nd coil pack smoked, we changed spark plug and coil. after 2 min it smoked another coil. always no 7 ...