Questions & Answers for: Chevrolet Cavalier chain and sprocket

Ad

Timing Chain Cover, Chain, Sprockets, replacement Timing Chain Cover, Chain, Sprockets, & Seal replace ment 2002 Chevrolet Cavalier 2.2L SFI OHV 4cyl (Vin No. 4) 2.2L VIN 4To Remove: Remove or ...

Ad

...Here is a picture of the gear set. The timing marks are in the black square box. Align the crankshaft sprocket and camshaft sprocket timing marks with the alignment tabs on the timing chain

Ad

...should be in alignment. If not, turn the crankshaft until the marks are aligned Fig. 2: The timing chain tensioner is retained by a Torx head bolt (1) and a regular hex head bolt (2) Exploded view

Question about 2003 Cavalier

1 Answer

...sprocket, then the chain through the top of the head-2.2L (VIN F) engine Remove the upper balance shaft chain guide, then the chain-2.2L (VIN F) engine More details and repair guide in there site. I ...

Question about 1997 Cavalier

1 Answer

...and creates slack in chian between cam sprockets Don't pull the bolts out until you have the chain, all the guides and the tensioner

Question about 1997 Cavalier

2 Answers

...sprocket and chain together. If the sprocket does not slide from the camshaft easily, a light blow with a soft mallet at the lower edge of the sprocket will dislodge it. Using a suitable gear puller, ...

Question about 1997 Cavalier

1 Answer

...chain or sprocket is installed with the wear pattern in the opposite direction, noise and increased wear may occur. Mark the crankshaft sprocket and timing chain outer surface for reassembly, then ...

Question about 1997 Cavalier

2 Answers

...sprocket and chain together. If the sprocket does not slide from the camshaft easily, a light blow with a soft mallet at the lower edge of the sprocket will dislodge it. Using a suitable gear puller, ...

...chain and sprockets replaced but the car will not start on a 2003 chevy cavalier 2.2l 2.2L chevy cavalier. how do I set the timing without putting it on the computer I had a 2000 cavalier with a 2.2L ...

chain and drive sprockets. How do you get the small sprockets off the balance shafts?? on a 2003 chevy cavilier 2.2 ecotec. You need to remove the balance shafts first. Be VERY careful or you will end

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...