Questions & Answers for: chain saw vapor lock

Question about Garden

1 Answer

...chain saw bought this saw in 04 new.been pack up and when you run the saw and it get hot .when you shut saw off and let it sit it will vapor lock.had the saw to too shop and they can not fix saw.no ...

Ad

...chain saw starts and runs for 20 minutes then stops. Saw starts fine and cuts for about 20 minutes. Then it starts to sputter and stops. I can restart and idle but won't run when I press accelerator. ...

Ad

Question about Pro 42CC 2 Cycle Chainsaw, 18"

1 Answer

chain saw model # 358-3650802. this saw seems to start and run ok when cold. after running hard for apx 20 minutes or so and shutting down for refueling/oil and let saw cool down for 10-15 minutes the

Question about Pro 42CC 2 Cycle Chainsaw, 18"

1 Answer

...saw inside very thououghlr and try Amoco white gas. You should be able to reduct the heating and get more run time. A carb rebuild might also help some but in hot weather it is not unusual for chain ...

saw is hot. I have : removed the cylinder and found it to be scored very bad, i replaced the cylinder and piston, replaced the fuel filter, removed the carb and checked for debris, new spark plug, new

Question about Pro Chain Saw 46cc 20"

1 Answer

vapor lock runs for a few miutes then bogs down when gas cap is opened it sprays gas and primer will not fill withgas The tank vent is a bronze plug inserted into the tank casting--the caps are not ...

Question about Pro 18 Inch 400E Chain Saw

1 Answer

...vapor lock ? or what and the solution is ? Thanks Dave P.S. I love my saw its awsome its just a little sick When it overheats it may not be getting enoiugh oil. The oiler may be weak have it checked. ...

Question about PP4218AV 18" Chain Saw

1 Answer

...vapor locking?what causes it? saw runs great for five minutes then acts like it runs out of gas. I don't think your problem is vapor lock. Your machine is just starving for fuel. Your problem can be ...

Question about PP4218AV 18" Chain Saw

1 Answer

...chain oil in auto lube tank , some suppliers even tell you right on bottle what to set your drip rate too for your model saw , other types of oil wont have the same viscosity (or temp range) to lube ...

chain saw wont start put in new spark plug will hardly turn over very hard to pull feels like its a vapor lock any ideas please? hard to pull indicates something seized up remove the chain and if that

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...