chain saw and the chain came off. Now that I have put it back on, it won't move either by hand or when the engine is running. Help OK. This is simple. Either the chain brake is engaged or the chain is
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
...chain saw stalls when I put the chain brake on. Also the chain will not move freely when the saw is stopped and the brake in on. i can hear the piston moving inside the engine. it appears the clutch ...
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
...chain saw model PCN4545. The chain brake keeps tightening against the bodywork making the chain inoperative. Any ideas how to prevent this happening please you can remove the chain brake , i have on ...
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
...chain saw but cannot get chain and blade to move. What would be causing this Check the chain brake safety mechanism, see if it is jammed or see if chain has come out of track... Most likely, your ...
chain saw. Prior to shipping the saw, the shipper removed the bar and chain. Apparently while removing the bar, they jammed the chain brake into the locked position. The brake lever (front hand guard)
Question about 20" 60cc Rancher Chain Saw 460
husqvarna 460 rancher saw- chain brake is tripped and locked; cannot replace cover How do I reset the chain brake? Pull back on the chain brake, this will release it.
...CHAIN SAW.....BRAND NEW IN JUNE...NEVER USED....WITH BLADE, CHAIN, AND SIDE COVER (TENSIONER ASSY) REMOVED, IT RUNS FINE......WHEN CHAIN BAR , CHAIN, AND COVER ARE REINSTALLED AND ADJUSTED, IT WILL ...
Question about Factory Reconditioned 18" 40cc 2-Cycle Gas Powered Chain Saw #ZRRY10532
...brake by pulling back on hand guard till a click is felt some folks moving up from an older saw to a more modern saw are not so familiar with chain brakes and don't understand them and how they ...
Question about 14-Inch 34cc Gas Powered Chainsaw Refurbished 235E-BRC-RB
...saw chain. Slip chain off bar over bar tip and towards inward side of bar. Remove two nuts loosened in step 2 and pull brake assembly and bar straight out and off bar mounting studs. While rotating ...
Question about 14-Inch 34cc Gas Powered Chainsaw Refurbished 235E-BRC-RB
...saw, new oil ,petrol etc. it starts well but the chain will not rotate. Brake in correct position but the brake will not rotate for petrol chain saws the brake lever is fully forward for the chain to ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions