Questions & Answers for: chain oiler leaking

...oiler ports in rear of bar as well as the chain slot. Are you using motor oil instead of bar oil? Make sure there is nothing to prevent bar from making close contact with oiler port in case. ...

chain oiler filler cap to release any preasure that might have built up during use and is forcing oil out as it sits. It sounds like a simple fix but it might just work. The oiler on most chainsaws is

...oiler quit working. I washed out the oil res with gas, no help. Common problem with Poulan and Craftsman gas saws. Take off the chain and chain guide and clean out all the saw dust etc. Start saw ...

...chain off--run the engine--the oiler port from the case should discharge some oil. If none, you have trouble with the oil pump or the tubes to and from it. The oil tank may be leaking at the tank ...

Hello, I have a 2450 woodmaster, run great, cuts great, but when its not running it leaks oil from chain oiler. Thanks, James Change the oiler sealer.Parts at ..

...chain oiler does not pump oil to the chain, oil run down along side case, does not get up to the bar not familiar with that model but check that the oil passage from the pump to the bar is clear and ...

oil leaks from the bar oiler when not inuse on Husqvarna 268 Oil leaks from chain bar oiler Try THICKER oil like straight 30 weight

chain oil. How do I correct this? (photos available) Chainsaws can become messy even if the oiler is working correctly. Check the oil level frequently during a cutting session. If frequent refills are

...chain oiler. Will have to take apart to view the chain oiler , and check if oil is puddling just under the oil tank. There is some epoxy sealers, or gas tank stop leak material that can possibly ...

...chain oil tank on my McCulloch EM 14 ES to the oiler has deteriorated. Can I get a new hose or do I have to replace the entire oil tank assembly I found that my McCulloch EM 14 ES chain saw was ...