Questions & Answers for: chain brake

Question about Garden

1 Answer

...chain brake will not let the chain spin. Is that a clutch issue, or is there a adjustment on the handle of the chain brake It's probably the chain brake not disengaging. If you are handy you can ...

Ad

...chain brake is tripped. try this: Reset Chain Brake by Dolfoff Please follow this link, http://www.fixya.com/support/t3102817-re_install_side_cover_after_chain cursor down to ?Best Solution?, while ...

Ad

Question about CS400 18" Chain Saw

1 Answer

Chain brake jammed on Echo CS400 chainsaw I just purchased a new Echo CS-400 chain saw. Prior to shipping the saw, the shipper removed the bar and chain. Apparently while removing the bar, they jammed

Question about "Chain Saw - 16" Bar, 3 Hp

2 Answers

...chain brake to get the cover back on. You should be able to unlock it by pushing the chain brake handle forward, toward the bar and chain when mounted on the saw. I think you are missing the point. I ...

...chain brake, grab the brake handle and pull it firmly back to the top handle, this should didd engage the brake, if the chain has de railed the drive lonks will have burs on them which will make it ...

Question about Used Ms290 Ms 290 310 390 029 039 Wear Blocks

1 Answer

...and run but chain wont turn Chain brake may still be applied. The chain brake is the front hand guard, pull it towards you to release the safety brake. Check chain tension, the chain may be too

...installing the chain and replacing the bar cover the chain will not move freely Have you got chain brake on Also check the chain brake if it is on pull the chain brake handle back and turn it

Question about 450 e-series 18" Chain Saw

1 Answer

...chain brake an where not on the older chainsaws newer ones it s normally the black lever you hold Check the Chain Brake Make sure the chain brake is working properly by putting the chainsaw on a ...

Question about 2375 Wildthing Chainsaw Gas / Fuel Cap Csi Chainsaw Models Listed

1 Answer

...chain brake isn't engaged. The chain brake can activate automatically by a sudden movement or impact. You can disengage the chain brake by pulling the chain brake hand guard back against the front ...

...chain brake, the chain brake will not pull back, am I missing something? What is a bar knob. Thanks taking it that you are referring to a petrol chain saw the chain brake is the big lever at the top ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...