Questions & Answers for: chain and ball solution

Maintenance what tools do I need for chain maintenance? Various wrenches. A soft brush, or old toothbrush. An O-ring friendly chain cleaner (if, like most chains, yours is of an o-ring type.) O-ring ...

...ball chain, but alas every ball gets stuck on the edge where it exits the fan motor unit as it is pulled. Its just a matter of time before too much pressure is applied and the chain breaks. The chain ...

...the ball chain attached to that yellow float. Remove the plastic clip and reattach it at least one ball tighter to the flap. To make this easier you may want to pop the float off its pivot

the chain between the flush handle and the flush ball. One other possibilty is that the fill valve is not shutting off the bowl wash function. There is a small adjustment screw for regulating the flow

the chain between the flush handle and the flush ball. One other possibilty is that the fill valve is not shutting off the bowl wash function. There is a small adjustment screw for regulating the flow

...(2) a flush handle chain that is too long and is getting caught between the flush valve ball and the seat, which is easily remedied by shortening the chain between the flush handle and the flush

...ball in the bottom of the tank, it has a chain going from it to the flush handle. First make sure the chain has not flipped over the handle or gotten twisted, I have seen this happen and it does not ...

...ball, but when the flush handle is pushed, the toilet bowl does not empty all the way. The handle must be held down during the flush for the bowl to completely empty. please advise how to adjust . if ...

the water it shuts off the flow.  There should be a chain attached to the ball that is adjustable, letting the chain out allows more water in the tank, shortening it allows less water in the tank

what is ball and chain oil bar and chain oil.... it's the oil used for the bar/chain assy on chainsaws... used anywhere else it might cause a major catastrophy