...CDI, or starting with the clutch lever pulled. Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you ...
...wires. yesterday i got that cdi box, and now i have spark on all 4 but it still wont run, i changed staterz, coils, changed my oil and filter. its getting gas cause i can smell it. i put gas down the ...
...wires that come from the 4jh cdi box and there is more connectiing to it then the 3he cdi Was wondering if you knew best way to go about doing this does the bike have a fuel pump?what carbs are you ...
cdi to the coil with my own wires with thinking there could be a break in the wires.i've replaced them back to their original places to start back from ground zero could the voltage regulator possibly
wires back it started up this is no suprise of course it didnt run right! eletrical aint my thing tested what i could with my limited ability everything but cdi didnt have a clue! now it wont start at
I have a 92 LTD Vance&Heines FZR 600, (part# TID 14-73 3 H E-00) the cdi burned up and I was told that from 89 to 99 cdi would fit. So I bought 1 off a 95 FZR on EBAY (part# BB7233 3UU-10). The ...
...wires should go and how they fit in relation to the CDI. Hi, Anonymous for this scenario you will need two service/owners manual if you can't find the best tool you ever bought for your Yamaha, ...
Question about 1991 FZR 600
...it over after it starts i can turn it off and it will start and run fine all day any help thinking cdi box Hi, Anonymous and the usual suspects are: 1. Fuel tank empty. 2. Fuel supply valve/petcock ...
wires and installed a new harness a week ago, the bike starts up and I'm getting suction from all four carbs, but the third and second cylinder isn't firing and there's no spark for the third cylinder
Usually answered in minutes!
122 Questions
105 Questions
86 Questions
71 Questions
72 Questions