Need a wiring diagram for a 2005 kawasaki kdx200 the hayns manuals usually carry the circuit daigrams.Take a copy to anybody with a good photocapier and expand the haynes diagram to A3 to be able to ...
sometimes fires sometimes doesnt I have a 1990 kdx 200. I have put in a new spark plug, stator and cdi box. I am still having problems getting the bike to run. Sometimes I have spark and sometimes I ...
my charging system isnt charging on my Kawasaki my charging system isnt charging on my 1980 Kawasaki 200 three wheeler and was needing the wiring diagram have you tried testing the regulator rectifier
can you wire up a 1999 kdx 220 to charge up its every time i put the yellow wire from the magneto onto the posative terminal of the battery it flattens the battery? The magneto likely puts out AC ...
how to wire lights to the magneto it is a dirtbike with only a brake light that I found the wires have been cut. It never had a head light but if nothing else I would like to connect the tail lights ...
how do i wire lights You will have a basic light setup on the bike. You will need to use existing switches if possible and connect up from there. Bear in mind though it does not have a big alternator ...
Hi. I have a stock 1998 kdx 200 that needed a blackbox. I bought a replacement cdi but the wiring on the bike is different to the 98 cdi unit. Colors are different too. The wiring on the bike is a kdx
on my 1984 KDX200 the light bulbs keep blowing as soon as I rev the bike Make sure all wires and cables are clean and tight, especially the ground wires in your particular case.
Can someone tell me why the light bulbs keep blowing on my 1984 KDX200 as soon as I use the throttle? Likely due a bad ground wire. When you rev the engine, connection to ground become too weak and ...
Usually answered in minutes!
64 Questions
14 Questions
8 Questions
2 Questions
2 Questions
