Questions & Answers for: cartridge sensor unit

...SENSOR ASSY ADCToner Cartridge KToner Cartridge YToner Cartridge MToner Cartridge CHARNESS ASSY ADCSENSOR HUM & TEMPHARNESS ASSY MAINROS ASSYPWBA MCU LV/HVPSHead for the ADC Sensor assy first. It's ...

...unit Remove the toner cartridge: Open the top cover. The imaging units are sensitive to light. Do not expose the imaging units to light any longer than necessary to remove it and cover it. Failure to ...

...sensor of cartridge unit fail which send a wrong signal. you may try: 1)take out cartridge unit looking carefully a tiny switch at one side with a smal metal stander or a plastic button(you may hear ...

cartridge sensor at oneside of cartridge unit body, fuser sensor near fuser roller. usually need to clean or adjustment the position. 3) check input roller and cartridge unit and fuser unit at running

...sensor between cartridge and fuser unit 4)fusing sensor before fusing 5)out put tray sensor check all sensors if you can find out and check any paper jam there and check sensor stander at normal ...

...sensor? As the toner cartridge sits in the drum unit, the toner sensor outputs signal to drum unit which in turn conveys it to the printer via electrical contacts. Try cleaning the contacts that are ...

...cartridge sensor is connected via the drum unit, so usually the problem is with proper seating of the drum unit and good electrical contact between the metal fields on the sides of the drum unit and ...

...cartridge door sensor is faulty/bad Something is block the ink cartridge door sensor or the notch that deactives the sensor is broken. Checkout the door and locate the sensor and manually deactivate ...

...cartridge sensor number too, if I were to change the cartridge. The new cartridge seem having two different toner sensor cartridges. ST and FT sensor; So which one of the sensor will it work properly ...

...cartridge or the toner sensor. Here are some steps you can follow to try and clear the error: Turn off the photocopier and unplug it from the power source. Remove the toner cartridge from the ...