Questions & Answers for: Holden Rodeo car wont shift high gear

...gear shift instructions'' on your sun visor it will tell you if you need to be in neutral or slowly moving when you are changing from 4h to 2h also make sure there is no load on the transfer ...

Ad

the gauges wont light up in my rodeo and the clock light doesnt work either. I have checked the fuses and globes but none seem to be blown. Could there be another reason to why this is not working?? ...

Ad

Question about 2005 Rodeo

1 Answer

rodeo petrol starts but wont rev holden rodeo petrol ute will fire but not rev 1992 model Holden Rodeo 1989 2.6mpi , start and only runs for 2 or so seconds themselves stalls, after putting on a fuel ...

Question about 2005 Rodeo

1 Answer

car has done a few km's.worn piston rings casing oil to get into the cylinders and burn with the fuel also caed by high kms'.Does the water in the radiator seem to have an oiley feel if so you

Question about 2005 Rodeo

1 Answer

holden rodeo is idling very high Loud noise also, think it could be owing from the manifold Spray aero start around manifold while idleing. if revs pick up there is a leak. repair the leak

everything in the cluster works apart from the odometer, ive tried resetting the trip computer but no luck any help is much appreciated, is it possible the guy that sold it to me pulled a shifty and ...

2004 holden rodeo 3L ITD. dt P1120. Saying tps fault. Used scan tool to inspect data list an ECU is recieving signal perfect. Goes from 16% to 100%. Double checked TPS output from TPS plug and goes ...

Question about 2005 Rodeo

1 Answer

engine light wont go off the engine wont go off at any time but all power is still there That mean you have obd code,need scanner to read code then fix.

...Am I expecting too much by expecting some help from the dealer? I have purchased a number of cars from the dealer over 40 years. The modification you quote would have been issued from the ...

oil light is on and engine in limp mode Rodeo had been going great all day, pulled up at the lights, the oil light came on and engine went into limp mode. Have plenty of oil pressure, have changed oil

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...