Questions & Answers for: Mazda 626 car windows steam turn heater

...steam coming out of exhaust pipe The last time I drove the car it was running fine. No missing, no overheating etc. The next day when I started the car it was missing on one cylinder and had what ...

...steam or noise, so I turn on the heater full blast, it goes RIGHT BACK down! But, even tho the heater is still on, the gauge goes up then down...it scares me as I dont' want to blow the engine or ...

...windows, but the car is not starting. I noticed that "Air bags" light is blinking. Is the car is not starting coz this "air bag" is not reset? Is it blinking coz it is still hit in the platform? If i ...

steam and water coming out of my exhaust head gasket went, had all new gaskets and skim, rebuilt engine, 250miles head gasket went again found out cause of prblem, re fitted gasket aswell as using ...

heater will not come on when you turn the knob nothing happens the a/c light does not comeon all the other lights will but it will not blow any air hot or cold Well first check the fuse for the heater

car would be running hot. Usually, when you have steam/water coming out the overflow, if it is not a problem with the cap, then you are indeed running hot. If the thermostat is not opening or is stuck

car up with steam, and constantly steams up the window, which is dangerous for driving. I thought that the fluids were low, but i checked and filled them and the problem still continues, what could be

...car. i see steam and smell coolant. where ever u see the steam is ur leak-- steam is the coolant burning off usually wont show a puddle unless hose leak,or pump leak-- if the steam coming from ...

...turn my heater on and I hear a knocking sound and smell burnt rubber This is not good.  Sounds like the heater fan bearing and/or resistor is burning out.  Not familiar with your heater fan ...

...read I'm thinking it could be the distributor. It's making a buzzing noise after I try to start my car. I've hooked my battery up to someone else's car and still wouldn't start. The engine is making ...