Questions & Answers for: Chevrolet Silverado car windows steam turn heater

...turn it off at all until the engine has cooled down. There is no adjustment, it's full bore all the time. this is issue with the fuel pump. it is most likely the fan speed selector for the heater ...

Ad

Question about 2003 Silverado Ss

1 Answer

...heater on diver side comes on all the time. I turn it off and in a few seconds it comes right back on. All I want to do is cut the wires to it. Where do I find them? Look under the seat. If you have ...

Ad

can a heater core leak without leaking inside the truck depends on symptons usually leaks underdash or when you put heater on in window could leak from hose on outside of car

...the drivers heated seats turn on by itself There is a good chance the drivers door seat heater switch is shorted closed. This can happen if the window was down and it rained into the door

...windows are not steaming up.any ideas Even though you do not feel antifreeze on the rugs. The only way the smell of Anti freeze can get in the cab is, It's leaking from the heater core. Maybe not ...

...bit, it will **** that steam into your truck and fog the windows.  If you can smell a hint of antifreeze in the cab when you are driving, you have a cracked heater core or a loose

...fog up wipe window with hand and see if it is greasy . if it feels oily then you may have a bad heater core, the core leaks coolant out and steam and causing windows to fog up with a flim of

...and when I turn on the heater it small like it's overheating, and my windowsTake along time to defrost why i would guess that there is a leak in heater core is the smell just in car or outside ...

...turn on the heater it small like it's overheating Probably a heater core starting to leak(better take care of it now before it blows wide open!).You might be lucky enough to find a loose heater hose ...

Question about 2006 Silverado

1 Answer

...Turn ON the ignition, with the engine OFF. Command the HO2S heaters ON with a scan tool. Wait 15 seconds to allow the HO2S heater current to stabilize. Observe the affected HO2S Heater Current ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...