Questions & Answers for: canon powershot a620 camera repair

Canon A620 The power on/off button is stuck in the on position and will not turn off. Any ideas??? Thanks in advance. Remove batteries Try gently rocking it side to side back and forth. Then in the ...

...PowerShot A620 Canon digital camera. After a trip to the beach the lens shutter stopped shutting down, I manage to shut it down by my finger. It worked this way for couple of weeks then the screen ...

...Canon Powershot A620 face down in dirt during rain shower. Now lens cover will not automatically close. Camera operates fine in every other aspect. YES, BUT THAT IS A JOB THAT NEEDS TO BE DONE ...

Canon Powershot A620 was submerged for a few moments. It powered on afterwards, but I still took the batteries and memory stick out and let it dry. Now it will not power on.... Is there anything I can

black LCD screen on canon A620 camera black LCD with canon A620 camera There is a company in new york that carries a parts for small point& shoot digital cameras, : Camera Repair NYC

Canon PowerShot A620 says no memory card when there is a memory card installed. Tried two different cards and both not working. Card is not full or locked. Card door closes all the way. Owner's manual

...Canon Powershot A620 I have a Canon Powershot A620, in all but flash mode image is overexposed. I have reset factory setting but no luck, any suggestions? CCD FAILURE ! Just Call CANON for FREE ...

...Canon PowerShot A620, it tells me "Memory Card Error". This is a brand new card. What do I do? It had been working just fine with a SanDisk Ultra II; 2.0GB) Some cameras cannot handle over 2GB memory ...

...Canon PowerShot A620 has a black screen, any ideas on how I can fix this? I can't even take pictures, all of them come out black My A620 JUST started doing the same exact thing last night. LCD works, ...

...Canon Powershot A620 and the automatic lens cover stays partially open and won't close with the lens retracks. I can see two tiny springs inside by the front lens and one spring was not attached ...