Questions & Answers for: canon a530 camera memory card

memory card error Screen shows memory card error prompt. Reformat memory card command is disabled. Have tried three memory cards; two of which worked in other cameras. Any ideas? Connect your memory ...

...canon A530 from its memory card slot. when i inserted another memory card, the lcd showed" "memory card error" "card locked!" i inserted the other memory card but it still showed the same message. ...

...pictures to computer and screen shows memory card error Try another card. They can go bad. Check the contacts on the card for dirt or oils. If they are dirty, the camera's contacts will be dirty

...MB pqi Hi-Speed 133. The new card is a Sandisk SDHC card. The camera will not take a picture. The A530 is designed to work with SD cards, not SDHC cards. You'll need to go with cards 2GB and

...Canon Powershot A530 and when I put in an 4GM memory card I get Memory Card Error The A530 is designed to work with SD cards. Your 4GB card is actually an SDHC card. While it will fit into the slot, ...

...a530 tells me memory card error and i dont have a clue where to even start to try to fix it Having gone nearly two years without a response to my query, I assume my suggestion to use an SD card ...

...canon Powershot A530 camera which I am using for the last 5 years. Now the problem is when I switch on the camera a message is displayed ' Memory card error + card locked'. I was using a 1GB memory ...

...could it be the little battery No, but it might be that new 4GB SDHC card if you're trying to use such in an A530. Please see this article for troubleshooting steps for memory card error

...camera says memory card error no matter what card I put in. When I go to format it doesn't light up and it skips over it What type(s) and size(s) cards are you trying? The A530 works with MMC and SD ...

Canon PowerShot A530 camera. Format isn't an option on my camera. I have a PowerShot A530 camera and bought the right memory card which is an SD 2GB, but it still says memory card error so I tried ...