Questions & Answers for: cam torque settings

...torque settings all of them please. thats big end and main bearings, head bolts and cam shaft it is a twin cam motor. your assistance in this regard will greatly be appreciated. dear friend:here ...

...cover (cam cover) on What are the torque settings for the valve cover (cam cover) on a 1997 Saturn SL2 89 INCH pounds. Meaning very little torque, they will snap if given just a tad too much

torque wrench setting for cam cap bolts on Z24 Motor Can anyone tell me the torque wrench setting for the Cam cap bolts on a Z24 4cyl petrol motor Nissan Navara D21 11/1990 model I am helping a friend

...torque, the cam timing gear have lb.-feet of torque, and the cam bearing bolt has 14 lb.-feet of torque.Crankshaft Torque SpecsThe stock  rod bolts have 46 lb.-feet of torque and the ARP rod ...

...Cam shaft Torque rocker shaft My manual shows an 8RC for 70 and 71 and an 18RC for the 72-74 18RC valve clearance HOT IN .008 EX .014 cold spec. .007 .013 Cyl head 72-82 Ft Lbs Rocker caps 12-17 ft ...

hyundai getz 1600 torque settings on fly wheel head cylinder cam sprockets crank pulley cam caps See the settings here: http://www.autozmagz.com/search/hyundai+getz+cylinder+head+bolt+torque+settings

torque settings for cylinder head - cam caps - inlet manifold, exhaust manifold and cam pulley - please help !! Head bolts are torqued in 3 steps, 1-18ft.lbs, 2-60 degrees, 3-60 degrees, camshaft caps

Toyota 2E Engine: Torque setting for Cam sproket bolt Toyota 2E Engine: Please provide the torque setting for the Cam sproket bolt Torque: 59 N-m (600 kgf-cm, 43 ft-lbf)

...cam shaft torque settings need head bolt torque and cam shaft torque settings Torque setting Toyota Land-cruiser 80 Series 4.5 1995-98 Engine code: 1FZ-FE, 1HD. Stage 1: 20 Nm (Start tightening bolts ...

...torque settings for the cam caps and thermostat housing bolts on a Hyundai Getz 1.4 16 valve G4EE engine are: Cam caps: First step: 2.8-3.4 lb-ft or 4-5 Nm Second step: 11-13 lb-ft or 15-18 Nm Final ...