Questions & Answers for: Hyundai cam girl

Question about 1999 Sonata

1 Answer

camshaft the camshaft is out of position. the code was 340 on the tester. should i replace the camshaft postion sensor? Most likely yes. It's not that the cam is out of position (that's controlled by ...

Ad

Question about 2000 Sonata

2 Answers

...no1 spark plug.use a long thin screwdriver to watch piston move to TDC then back off a bit and turn cams ,look for slots or a grove on back or front of the cam or two recesses in the camshaft ...

Ad

Question about Motor 2003 Sonata

1 Answer

Cam sensor misfire The check engine light recently came on in my 03 Hyundai Sonata and when driven for long periods of time the car hesitates when stoping and then going. If you keep drving through ...

Noisy engine suggesting cam belt prob at 50,000 miles My 2006 Elantra engine is a bit noisy - could the cam belt need replacing after 80,000kms? Do you mean the "Timing Belt"? There is NO Cam belt.. ...

We need to know where the cam timing marks go on a 1998 Hyundai Accent.The cam was turned after the belt was removed. We need to know how to aline the camshaft. Hi The cam dowel should be at 12:00. ...

...with 122,000 km on it. Long story short, had to get a new head gasket put on, so rocker cover, cams, everything had to come off. Work was done and everything was put back together. I know where ...

Question about Motor 2004 Accent

1 Answer

cam bearing an a cam bearing be replaced without buying a new cam it depends on the condition of the cam journal were the bearing rides. if it scored then the cam needs replacing and the other ...

Timing marks on cam for timing chain 2007 Hyundai accent How many links are between the marks on the chain attaching to the cam shaft. we already replaced the timing belt. we are looking for the ...

hyundai tucson 2004 l/h rear door dont log with the oter doors hello u will find a lot of wiring diagrams and circuit diagrams help books and stuff like this at rel iable-store the girl in the chat ...

2015 hyundai sonata 2.0, first i gat dtc p0010 replaced cam seal and cover. immediately got new dtc p0016. its a pretty simple job cant imagine i messed something up cam seal that doesnt have anything

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 Hyundai Santa Fe
2004 Hyundai Santa Fe

1,503 Questions

2001 Hyundai Elantra
2001 Hyundai Elantra

1,180 Questions

2000 Hyundai Accent
2000 Hyundai Accent

1,131 Questions

2006 Hyundai Sonata
2006 Hyundai Sonata

1,254 Questions

2001 Hyundai Accent
2001 Hyundai Accent

1,082 Questions

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...