Questions & Answers for: cadillac wheel bearing problems

...bearing. But if it looks as if the wheel could fall off don't drive it to a repair shop if you are not repairing have it towed. I think the bearing is going out or gone out or your wheel lugs got ...

wheel started intermited lockind today.. whats the problem? If this is during braking I would check the abs.If this is happening while the brakes are not applied I would try checking the wheel bearing

...wheel bearing need to replaced. He put a new on on and tightened the spindel nut with an impact wrench. A few days latter the ABS would enguage on its own. Took it back there he said it was the on on ...

...Cadillac dealer changed wheel bearing and it did not solve the problem...they seem to be stumped by the issue. Sounds like a "WSS" (wheel speed sensor) problem. Each wheel has one. Located on the ...

...Wheel Roaring Noise Roaring noise consistent with speed only, acceleration or braking has no effect on noise. Gets louder with faster speed. Could it be a bearing problem? the wheel bearing is ...

Cadillac Delegance Front end noise , dissapears when going into right hand turn then returns when straightening out. Tires recently rotated and balanced , tire that was on right front had wear pattern

Cadillac catera in which both the tcs and abs warning lights come. When they do the speedometer quits working. This is an intermittent problem. There should be a vehicle speed sensor that is tied into

...Cadillac DTS makes noise when the wheel is turned, noise started after wheel bearings were replaced in the two front wheels the two front wheel bearings were re[laced, the car ride was smooth again ...

for driving. What is wrong and how do I fix it? Could be wiring or a wheel bearing. Have the codes read. This will help. I had similar problem! Corrected by replacing left front wheel bearing assembly

...cadillac srx 2010 After a visit to a dealer, with the stabilitrak lights on my dash, a Wheel bearing was changed for 500$ and it last 4 days only and the same lights and message re-appeared ...