Questions & Answers for: cadet 3 toilet

...cadet to install--3 or 4 I want a great tall commode that never needs plunging.  I was told a cadet was a good choice.  There are two cadets.  I was told a 3 is as good as a 4 and ...

...Cadet 3 toilets..how tight should the tank be bolted down to keep it from rocking? The tank should come down until it touches the bowl. You tighten one side a bit and then the other to bring it down ...

...about 15 minutes level in bowl brops to 2". No leaks appear anywhere. This is the second Cadet 3 we have installed in our home this year. First was perfect You have a blockage in your drainage

cadet 3 and every twenty minutes it will run for about three seconds and i know it isn't supposed to do that EITHER THE FLAPPER IS NOT PROPERLY ADJUSTED OR YOU WILL NEED A NEW FLAPPER. WATER IS SLOWLY

Cadet 3 toilet tank What is the yellow float like device attached to the flapper in the American Standard Cadet 3 toilet tank? Purchased from Home Depot. We noticed that some but not all tanks had the

Cadet toilet. It looks perfect in my bathroom, but the flush isn't as powerful as I thought it would be. Can someone help me? The flapper is secured with a rubber band. The rubber band must be removed

...cadet 111 6liter elongated toilet. I have replaced the flaper and the rubber seal in tank and I still have a problem with the toilet refilling itself after a hour or so. Any suggestions Hi, To see ...

...cadet 3 tank not fill water American Standard Cadet 3 Right Height round Toilet by - ADA Compliant If you verify that the water supply to the toilet is turned on, push down the float on the flush ...

...cadet 3 toilet? Help! I have an American Standard Cadet 3 #4021N 4.8 LPF 1.28 GPF there is a bar code # 7930956475. Have replaced all the seals. I've also replaced the lapper at least five times I've ...