...turn and lock the nut. Replace the derby cover and adjust the cable so that you've vote about an 1/8 inch of freeplay at the clutch lever. Lock the lock nut and replace the bellows. Good Luck, ...
...Lock the locknut down. Adjust the cable adjuster back out until you have about 1/8" freeplay at the clutch hand lever. Lock the locknut, replace the adjuster cover, and the derby cover. Good Luck ...
cable down until you come to a rubber bellows type cover. Move the cover up or down so you can get to the adjuster. Loosen the lock nut and turn the adjuster inwards about a half turn and try it. Keep
...lock nut. Adjust the cable adjuster inwards to make the cable as loose as possible. Now, remove the derby cover. In the center of the clutch assembly you'll see an adjuster. Loosen the locknut and ...
...lock nut down. Then go back to the cable adjuster and turn the adjuster barrel out until you've got about an 1/8 freeplay in the cable. Squeeze the clutch a few times and recheck the freeplay. ...
...lock nut and turn the cable adjuster in to get as much slack in the cable as possible. Then, take the derby cover off. In the middle of the clutch is the clutch adjuster. Loosen the lock nut and turn ...
...lock nut . take slack out of cable . hatleytalking.con ...good luck Loosen clutch cable adjuster located on clutch cable on left side of bike near front frame. Make sure lots of slack in cable. Then ...
Question about 2006 FLHX Street Glide
ignition locked static noise through speakers, dash gauges and lights flickering and no power Brand new battery but when ignition is off, the speakers have static nosie coming through them. When I ...
Question about 2007 FLHX Street Glide
...cable incorrectly. If you can get play, then remove the derby cover. Loosen the adjustment screw lock nut. Screw out the screw until it turns freely. Then gently turn the screw in until you can feel ...
Usually answered in minutes!
644 Questions
133 Questions
72 Questions
82 Questions
68 Questions
