keyboard my keyboard the numbers on my letters are locked so i cant type any letters on that side of the computer Solution #1, Go to RUN type in 'msconfig'. In startup uncheck MotiveSB. Try to ...
...some clones will never work. cable not damaged cable not upside down connector there not damage the lock not broken,(easy) the MOBO buffer chip not ESD damaged. BINGO BIOS now works by key ...
lock). I managed to connect it to an external monitor, and it worked fine. Any suggestions? Does this necessarily point to a hardware problem (backlight, invertor)? Many thanks in advance. Give this a
...I am assuming it is a connection problem. Thank you, Wes you seem to have a defective or lose cable from the screen to the motherboard you will need to remove the button function panel and the ...
...lock blinks twice remove the battery and adapter. press power button for 30 sec. then connect the adapter. press power button. if this didnt work. you need to ask for an help of a local tech to check ...
Question about Presario 700 470024-192 Notebook
...don't come on when I power up my laptop. Hi tnwright200, try this step: Turn off the pc remove the cables and battery on your laptop Press and hold the power button. reinsert the cables and battery ...
cable back fixes it. do you know how to lock and unlock laptop ribbon connector locks and not damage them. this is a first things first set of skills. ask. (there are 3 kinds, what you have id have to
lock light blink but no display kindly help Take out the battery and disconnect the power cable. Press power button for at least 1 minute.This will remove any static power from the pc. After this just
...Rest (Top Cover) of the laptop. NOTE* The Keyboard is attached TO the motherboard by the Keyboard Cable. The Keyboard Cable does not come off of the Keyboard. After the tabs are freed, the Keyboard ...
Question about Presario CQ60-220US PC Laptop
...lock blink constantly blink 1 time constantly not stop blinking You may try this fix. No guaranties though. Remove the battery and unplug power cable. Then hold down the "power" button for about 10 ...
Usually answered in minutes!
3,409 Questions
2,234 Questions
796 Questions
680 Questions
378 Questions